Phone:0710-3552030、13871636870
产品属性

4 Min Epoxy Steel Gum in card

广东省某某某科技有限公司
联系方式: 13622225555
官方微博: 广东某某有限公司
地址: 广东省珠海市香洲区XXX街道666号8楼233室
产品介绍

Taisn Fast Curing Epoxy Steel Gum (Excellent performance in bonding the hard-plastics and rubber) 

Main Characteristics:      


Two-part, high bonding strength, fast cure, can bond oil surface, and the layer as solid as iron after cured a few minutes, can bond a variety of substrates, especially for bonding hard-plastics substrates.


 

Application:


Used for sealing automobile,Jade,crystal,ceramic,motorcycle,electrical equipment,toys,lamps,daily necessaries. 


Technical Properties:


   Appearnce

A: Green viscous liquid

B: Red viscous liquid

Viscosity(cps, 25°c)

A: 4000±500

B: 4000±500

Cure Time(min. 25°c)

       ≤ 5

Tensile Strength(steel×steel.mpa)

       ≥18

Impact Strength(kJ/m3)

       ≥10


Packing Specifications:


20g/blister card

400 cards/out carton

57g/blister card

144 cards/out carton

20g/box

400 boxes/out carton

80g/box

100 boxes/out carton


Instruction :

 

1.The uncoated surfaces should be clean and dry.

2.Spin the nozzle and puncture the seal by it cap, Squeeze out equal amount of glue from A and B tubes and mix thoroughly.(Don’t mix the glue with large quantity at one time)

3.Coating the mixed adhesive on the preparing surfaces, the initial curing of adhesive in 5 min at room temperature, after 10~30 min, it get working strength.

4.This product can be used at any temperature between -60°c~120°c



AB Glue Storage:

Keep in shade and cool  environment. Shelf life is 1 year.


OEM Service:

MOQ is 30000 sets each item and no extra cost.


Taisn Fast Curing Epoxy Steel Gum (Excellent performance in bonding the hard-plastics and rubber) 

Main Characteristics:      


Two-part, high bonding strength, fast cure, can bond oil surface, and the layer as solid as iron after cured a few minutes, can bond a variety of substrates, especially for bonding hard-plastics substrates.


 

Application:


Used for sealing automobile,Jade,crystal,ceramic,motorcycle,electrical equipment,toys,lamps,daily necessaries. 


Technical Properties:


   Appearnce

A: Green viscous liquid

B: Red viscous liquid

Viscosity(cps, 25°c)

A: 4000±500

B: 4000±500

Cure Time(min. 25°c)

       ≤ 5

Tensile Strength(steel×steel.mpa)

       ≥18

Impact Strength(kJ/m3)

       ≥10


Packing Specifications:


20g/blister card

400 cards/out carton

57g/blister card

144 cards/out carton

20g/box

400 boxes/out carton

80g/box

100 boxes/out carton


Instruction :

 

1.The uncoated surfaces should be clean and dry.

2.Spin the nozzle and puncture the seal by it cap, Squeeze out equal amount of glue from A and B tubes and mix thoroughly.(Don’t mix the glue with large quantity at one time)

3.Coating the mixed adhesive on the preparing surfaces, the initial curing of adhesive in 5 min at room temperature, after 10~30 min, it get working strength.

4.This product can be used at any temperature between -60°c~120°c



AB Glue Storage:

Keep in shade and cool  environment. Shelf life is 1 year.


OEM Service:

MOQ is 30000 sets each item and no extra cost.