Phone:0710-3552030、13871636870
产品属性

4 Min Epoxy Steel Gum in Box

广东省某某某科技有限公司
联系方式: 13622225555
官方微博: 广东某某有限公司
地址: 广东省珠海市香洲区XXX街道666号8楼233室
产品介绍

Taisn 5 Min Quick Set Epoxy Steel Gum


Main Characteristics:      


 Two-part, high bonding strength, fast cure, can bond oil surface, and the layer as solid as iron after cured a few minutes, can bond a variety of substrates, especially for bonding hard-plastics substrates.


Application:


 Bond and assemble of plastics panels, oil pumps, water pumps, bumpers, dashboards, industrial tanks and pipes in cars, automobiles, and farm machines. Also, it can bond in elevators, machines, artifacts, and wooden products.


Technical Properties:


10g+10g/card

400cards/out carton

10g+10g/box

400boxes/ out carton

40g+40g/card

100card/ out carton

40g+40g/box

100boxes/out carton

2kg/pairs

2kg in plastic bottles


Directions:


1.The uncoated surfaces should be clean and dry.


2.Spin the nozzle and puncture the seal by it cap, Squeeze out equal amount of glue from A and B tubes and mix thoroughly.(Don’t mix the glue with large quantity at one time)


3.Coating the mixed adhesive on the preparing surfaces, the initial curing of adhesive in 5 min at room temperature, after 10~30 min, it get working strength.


4.This product can be used at any temperature between -60°c~120°c


 


 Attention:


1.Keep out of reach of children.


2.Use the glue in adequate ventilated place, it can produce acrylic irritating odor during operation.


3.Store in dry and cool place, keep away from heating and fire.


Taisn 5 Min Quick Set Epoxy Steel Gum


Main Characteristics:      


 Two-part, high bonding strength, fast cure, can bond oil surface, and the layer as solid as iron after cured a few minutes, can bond a variety of substrates, especially for bonding hard-plastics substrates.


Application:


 Bond and assemble of plastics panels, oil pumps, water pumps, bumpers, dashboards, industrial tanks and pipes in cars, automobiles, and farm machines. Also, it can bond in elevators, machines, artifacts, and wooden products.


Technical Properties:


10g+10g/card

400cards/out carton

10g+10g/box

400boxes/ out carton

40g+40g/card

100card/ out carton

40g+40g/box

100boxes/out carton

2kg/pairs

2kg in plastic bottles


Directions:


1.The uncoated surfaces should be clean and dry.


2.Spin the nozzle and puncture the seal by it cap, Squeeze out equal amount of glue from A and B tubes and mix thoroughly.(Don’t mix the glue with large quantity at one time)


3.Coating the mixed adhesive on the preparing surfaces, the initial curing of adhesive in 5 min at room temperature, after 10~30 min, it get working strength.


4.This product can be used at any temperature between -60°c~120°c


 


 Attention:


1.Keep out of reach of children.


2.Use the glue in adequate ventilated place, it can produce acrylic irritating odor during operation.


3.Store in dry and cool place, keep away from heating and fire.