Phone:0710-3552030、13871636870
产品属性

10:1 Two Component Silicone Potting Compound

广东省某某某科技有限公司
联系方式: 13622225555
官方微博: 广东某某有限公司
地址: 广东省珠海市香洲区XXX街道666号8楼233室
产品介绍

TS-9104 Two Component Silicone Potting Compound, Mix Ratio is A:B=10:1


Product description:

This product is two components organic silicone potting compound, which is designed for potting and protecting LED display, Pixel tube etc.


Product features:

◆. Medium viscosity, good flowability, easy to operate

◆. Good ageing resistance, weathering resistance and water-proof

◆. Excellent deep curing performance, potting parts can be full curing after 24 hours. Good flexibility, elasticity, and bending resistance.

◆. Long life, and stable working performance from -50℃~+200℃.

◆. Non-toxic after curing, good adhesion to most plastic, and good resistance to chemical.


Technical Data Sheet:


Before curing

Color

White, black or red

Viscosity

5000±100

Proportion

1.2~1.24g/cm3

Hardener percentage

10%

After curing

Viscosity after mixing

5000±100

Shore-A  

hardness

30~45

linear shrinkage

0.5%

Working temperature

-50~200℃

Breakdown voltage

20Kv/mm

Volume resistivity

≥5×1016Ω*CM

Dielectric constant

2.8(100KHz)

Initial curing time

1H(20℃,50% RH)



How to use:

Metering: Mix A part (potting compound) and B part(hardener) by ratio of A: B=10:1

Mixing: Pour B part to A part container, and mix stir parts uniformly.

Potting: Pour the mixed compound to the parts to be potting asap.

Curing: Set the potted parts at room temperature, enter the next process after initial curing, full curing time is 10-24 hours.


After curing, users can remove the residual film by knife, don’t shear the residual film by hand.


Storage and shelf life:

This product belong to non-hazardous goods, store the products in cool and dry place under 30℃. Shelf life is 12 months. Seal the products after using. There will be little film if not seal well, then remove the film and it won’t affect usage effect.


Attention:


This product is non-toxic after curing, but avoid contact with eyes and children before curing.





TS-9104 Two Component Silicone Potting Compound, Mix Ratio is A:B=10:1


Product description:

This product is two components organic silicone potting compound, which is designed for potting and protecting LED display, Pixel tube etc.


Product features:

◆. Medium viscosity, good flowability, easy to operate

◆. Good ageing resistance, weathering resistance and water-proof

◆. Excellent deep curing performance, potting parts can be full curing after 24 hours. Good flexibility, elasticity, and bending resistance.

◆. Long life, and stable working performance from -50℃~+200℃.

◆. Non-toxic after curing, good adhesion to most plastic, and good resistance to chemical.


Technical Data Sheet:


Before curing

Color

White, black or red

Viscosity

5000±100

Proportion

1.2~1.24g/cm3

Hardener percentage

10%

After curing

Viscosity after mixing

5000±100

Shore-A  

hardness

30~45

linear shrinkage

0.5%

Working temperature

-50~200℃

Breakdown voltage

20Kv/mm

Volume resistivity

≥5×1016Ω*CM

Dielectric constant

2.8(100KHz)

Initial curing time

1H(20℃,50% RH)



How to use:

Metering: Mix A part (potting compound) and B part(hardener) by ratio of A: B=10:1

Mixing: Pour B part to A part container, and mix stir parts uniformly.

Potting: Pour the mixed compound to the parts to be potting asap.

Curing: Set the potted parts at room temperature, enter the next process after initial curing, full curing time is 10-24 hours.


After curing, users can remove the residual film by knife, don’t shear the residual film by hand.


Storage and shelf life:

This product belong to non-hazardous goods, store the products in cool and dry place under 30℃. Shelf life is 12 months. Seal the products after using. There will be little film if not seal well, then remove the film and it won’t affect usage effect.


Attention:


This product is non-toxic after curing, but avoid contact with eyes and children before curing.