Fast Curing Acrylic AB Glue (Excellent performance in bonding the hard-plastics, metal and rubber)
Main Characteristics:
Two-part, high bonding strength, fast cure, can bond oil surface, and the layer as solid as iron after cured a few minutes, can bond a variety of substrates, especially for bonding hard-plastics substrates.
Application:
Bond and assemble of plastics panels, oil pumps, water pumps, bumpers, dashboards, industrial tanks and pipes in cars, automobiles, and farm machines. Also, it can bond in elevators, machines, artifacts, and wooden products.
Technical Data Sheet:
Appearnce | A: Green viscous liquid B: Red viscous liquid |
Viscosity(cps, 25°c) | A: 4000±500 B: 4000±500 |
Cure Time(min. 25°c) | ≤ 5 |
Tensile Strength(steel×steel.mpa) | ≥18 |
Impact Strength(kJ/m3) | ≥10 |
Packing Specifications:
20g/blister card | 400cards/ out carton |
20g/box | 400boxes/ out carton |
80g/blister card | 100card/ out carton |
80g/box | 100boxes/out carton |
2kg/pairs | 2kg in plastic bottles |
Directions:
1.The uncoated surfaces should be clean and dry.
2.Spin the nozzle and puncture the seal by it cap, Squeeze out equal amount of glue from A and B tubes and mix thoroughly.(Don’t mix the glue with large quantity at one time)
3.Coating the mixed adhesive on the preparing surfaces, the initial curing of adhesive in 5 min at room temperature, after 10~30 min, it get working strength.
4.This product can be used at any temperature between -60°c~120°c
Attention:
1.Keep out of reach of children.
2.Use the glue in adequate ventilated place, it can produce acrylic irritating odor during operation.
3.Store in dry and cool place, keep away from heating and fire.
Fast Curing Acrylic AB Glue (Excellent performance in bonding the hard-plastics, metal and rubber)
Main Characteristics:
Two-part, high bonding strength, fast cure, can bond oil surface, and the layer as solid as iron after cured a few minutes, can bond a variety of substrates, especially for bonding hard-plastics substrates.
Application:
Bond and assemble of plastics panels, oil pumps, water pumps, bumpers, dashboards, industrial tanks and pipes in cars, automobiles, and farm machines. Also, it can bond in elevators, machines, artifacts, and wooden products.
Technical Data Sheet:
Appearnce | A: Green viscous liquid B: Red viscous liquid |
Viscosity(cps, 25°c) | A: 4000±500 B: 4000±500 |
Cure Time(min. 25°c) | ≤ 5 |
Tensile Strength(steel×steel.mpa) | ≥18 |
Impact Strength(kJ/m3) | ≥10 |
Packing Specifications:
20g/blister card | 400cards/ out carton |
20g/box | 400boxes/ out carton |
80g/blister card | 100card/ out carton |
80g/box | 100boxes/out carton |
2kg/pairs | 2kg in plastic bottles |
Directions:
1.The uncoated surfaces should be clean and dry.
2.Spin the nozzle and puncture the seal by it cap, Squeeze out equal amount of glue from A and B tubes and mix thoroughly.(Don’t mix the glue with large quantity at one time)
3.Coating the mixed adhesive on the preparing surfaces, the initial curing of adhesive in 5 min at room temperature, after 10~30 min, it get working strength.
4.This product can be used at any temperature between -60°c~120°c
Attention:
1.Keep out of reach of children.
2.Use the glue in adequate ventilated place, it can produce acrylic irritating odor during operation.
3.Store in dry and cool place, keep away from heating and fire.