Taisn Fast Curing Epoxy Steel Gum (Excellent performance in bonding the hard-plastics and rubber)
Main Characteristics:
Two-part, high bonding strength, fast cure, can bond oil surface, and the layer as solid as iron after cured a few minutes, can bond a variety of substrates, especially for bonding hard-plastics substrates.
Application:
Used for sealing automobile,Jade,crystal,ceramic,motorcycle,electrical equipment,toys,lamps,daily necessaries.
Technical Properties:
Appearnce | A: Green viscous liquid B: Red viscous liquid |
Viscosity(cps, 25°c) | A: 4000±500 B: 4000±500 |
Cure Time(min. 25°c) | ≤ 5 |
Tensile Strength(steel×steel.mpa) | ≥18 |
Impact Strength(kJ/m3) | ≥10 |
Packing Specifications:
20g/blister card | 400 cards/out carton |
57g/blister card | 144 cards/out carton |
20g/box | 400 boxes/out carton |
80g/box | 100 boxes/out carton |
Instruction :
1.The uncoated surfaces should be clean and dry.
2.Spin the nozzle and puncture the seal by it cap, Squeeze out equal amount of glue from A and B tubes and mix thoroughly.(Don’t mix the glue with large quantity at one time)
3.Coating the mixed adhesive on the preparing surfaces, the initial curing of adhesive in 5 min at room temperature, after 10~30 min, it get working strength.
4.This product can be used at any temperature between -60°c~120°c
AB Glue Storage:
Keep in shade and cool environment. Shelf life is 1 year.
OEM Service:
MOQ is 30000 sets each item and no extra cost.
Taisn Fast Curing Epoxy Steel Gum (Excellent performance in bonding the hard-plastics and rubber)
Main Characteristics:
Two-part, high bonding strength, fast cure, can bond oil surface, and the layer as solid as iron after cured a few minutes, can bond a variety of substrates, especially for bonding hard-plastics substrates.
Application:
Used for sealing automobile,Jade,crystal,ceramic,motorcycle,electrical equipment,toys,lamps,daily necessaries.
Technical Properties:
Appearnce | A: Green viscous liquid B: Red viscous liquid |
Viscosity(cps, 25°c) | A: 4000±500 B: 4000±500 |
Cure Time(min. 25°c) | ≤ 5 |
Tensile Strength(steel×steel.mpa) | ≥18 |
Impact Strength(kJ/m3) | ≥10 |
Packing Specifications:
20g/blister card | 400 cards/out carton |
57g/blister card | 144 cards/out carton |
20g/box | 400 boxes/out carton |
80g/box | 100 boxes/out carton |
Instruction :
1.The uncoated surfaces should be clean and dry.
2.Spin the nozzle and puncture the seal by it cap, Squeeze out equal amount of glue from A and B tubes and mix thoroughly.(Don’t mix the glue with large quantity at one time)
3.Coating the mixed adhesive on the preparing surfaces, the initial curing of adhesive in 5 min at room temperature, after 10~30 min, it get working strength.
4.This product can be used at any temperature between -60°c~120°c
AB Glue Storage:
Keep in shade and cool environment. Shelf life is 1 year.
OEM Service:
MOQ is 30000 sets each item and no extra cost.