FS-801 Conveyor Belt Repair adhesive, Cold Bond Cement
Product Description:
Taisn 801 is cold vulcanized splicing cement. Double components, high strength, good flexibility adhesive. Applied for self-adhesion or bonding between conveyor, rubber, fabric, leather. Peeling strength at bonding area is higher than combination strength between rubber and fabric.
Technical Data Sheet:
Part No. | Color | Appearance | Density(g/cm³) | Peel strength(N/cm) GB/T2791-1995 | Mix ratio | Operating time(min) | Curing time | Heat resistant(°C) |
TS-801 | Brown | Liquid | 0.9-1.3 | 110 | A:B=9:1 | 20-40 | 2 hours | 100 |
How to use:
1, Surface treatment: Deburring the parts to be bonded. Clean and dry the parts.
2, Mix: Pour the B-part into A-part directly and stir them quickly. Then, pour the mixed adhesive to the parts.
3, Curing: Curing time is 2-3 hours at room temperature. After one day, it can get to highest bonding strength.
Packing:
1kg/set, 700g/set
FS-801 Conveyor Belt Repair adhesive, Cold Bond Cement
Product Description:
Taisn 801 is cold vulcanized splicing cement. Double components, high strength, good flexibility adhesive. Applied for self-adhesion or bonding between conveyor, rubber, fabric, leather. Peeling strength at bonding area is higher than combination strength between rubber and fabric.
Technical Data Sheet:
Part No. | Color | Appearance | Density(g/cm³) | Peel strength(N/cm) GB/T2791-1995 | Mix ratio | Operating time(min) | Curing time | Heat resistant(°C) |
TS-801 | Brown | Liquid | 0.9-1.3 | 110 | A:B=9:1 | 20-40 | 2 hours | 100 |
How to use:
1, Surface treatment: Deburring the parts to be bonded. Clean and dry the parts.
2, Mix: Pour the B-part into A-part directly and stir them quickly. Then, pour the mixed adhesive to the parts.
3, Curing: Curing time is 2-3 hours at room temperature. After one day, it can get to highest bonding strength.
Packing:
1kg/set, 700g/set