TS-9104 Two Component Silicone Potting Compound, Mix Ratio is A:B=10:1
Product description:
This product is two components organic silicone potting compound, which is designed for potting and protecting LED display, Pixel tube etc.
Product features:
◆. Medium viscosity, good flowability, easy to operate
◆. Good ageing resistance, weathering resistance and water-proof
◆. Excellent deep curing performance, potting parts can be full curing after 24 hours. Good flexibility, elasticity, and bending resistance.
◆. Long life, and stable working performance from -50℃~+200℃.
◆. Non-toxic after curing, good adhesion to most plastic, and good resistance to chemical.
Technical Data Sheet:
Before curing | Color | White, black or red | Viscosity | 5000±100 |
Proportion | 1.2~1.24g/cm3 | Hardener percentage | 10% | |
After curing | Viscosity after mixing | 5000±100 | Shore-A hardness | 30~45 |
linear shrinkage | 0.5% | Working temperature | -50~200℃ | |
Breakdown voltage | 20Kv/mm | Volume resistivity | ≥5×1016Ω*CM | |
Dielectric constant | 2.8(100KHz) | Initial curing time | 1H(20℃,50% RH) |
How to use:
Metering: Mix A part (potting compound) and B part(hardener) by ratio of A: B=10:1
Mixing: Pour B part to A part container, and mix stir parts uniformly.
Potting: Pour the mixed compound to the parts to be potting asap.
Curing: Set the potted parts at room temperature, enter the next process after initial curing, full curing time is 10-24 hours.
After curing, users can remove the residual film by knife, don’t shear the residual film by hand.
Storage and shelf life:
This product belong to non-hazardous goods, store the products in cool and dry place under 30℃. Shelf life is 12 months. Seal the products after using. There will be little film if not seal well, then remove the film and it won’t affect usage effect.
Attention:
This product is non-toxic after curing, but avoid contact with eyes and children before curing.
TS-9104 Two Component Silicone Potting Compound, Mix Ratio is A:B=10:1
Product description:
This product is two components organic silicone potting compound, which is designed for potting and protecting LED display, Pixel tube etc.
Product features:
◆. Medium viscosity, good flowability, easy to operate
◆. Good ageing resistance, weathering resistance and water-proof
◆. Excellent deep curing performance, potting parts can be full curing after 24 hours. Good flexibility, elasticity, and bending resistance.
◆. Long life, and stable working performance from -50℃~+200℃.
◆. Non-toxic after curing, good adhesion to most plastic, and good resistance to chemical.
Technical Data Sheet:
Before curing | Color | White, black or red | Viscosity | 5000±100 |
Proportion | 1.2~1.24g/cm3 | Hardener percentage | 10% | |
After curing | Viscosity after mixing | 5000±100 | Shore-A hardness | 30~45 |
linear shrinkage | 0.5% | Working temperature | -50~200℃ | |
Breakdown voltage | 20Kv/mm | Volume resistivity | ≥5×1016Ω*CM | |
Dielectric constant | 2.8(100KHz) | Initial curing time | 1H(20℃,50% RH) |
How to use:
Metering: Mix A part (potting compound) and B part(hardener) by ratio of A: B=10:1
Mixing: Pour B part to A part container, and mix stir parts uniformly.
Potting: Pour the mixed compound to the parts to be potting asap.
Curing: Set the potted parts at room temperature, enter the next process after initial curing, full curing time is 10-24 hours.
After curing, users can remove the residual film by knife, don’t shear the residual film by hand.
Storage and shelf life:
This product belong to non-hazardous goods, store the products in cool and dry place under 30℃. Shelf life is 12 months. Seal the products after using. There will be little film if not seal well, then remove the film and it won’t affect usage effect.
Attention:
This product is non-toxic after curing, but avoid contact with eyes and children before curing.