Anaerobic flange sealant 574
Product Description
574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections
Technical Data Sheet:
PRODUCT | MAX GAP FILLING (mm) | VISCOSITY 25°C (mPa s) | COLOR | FULL CURE TIME(h) | SHEAR STRENGTH (psi) | TEMPERATURE RANGE °C | DESCRIPTION |
574 | 0.25 | 70000/120000 | ORANGE | 24 | 1232 | -54 +150 | machined and rigid metal flanges |
How to use
1. For best performance bond surfaces should be clean and free from grease and other contaminants.
2. The product is designed for close fitting flanged parts with gaps up to 0.25 mm (0.01 in).
3. Apply manually as a continuous bead, a rolled film or by screen printing to one surface of the flanges. For gaps greater than 0.125mm (0.005 in) using a pen roller, a rolled film should be applied to both flange surfaces.
4. Low pressures (<0.05 MPa, <7 psi) may be used when testing to confirm a complete seal immediately after assembly and before curing.
5. Flanges should be tightened as soon as possible after assembly to avoid shimming.
Package:
50ml, 20kg
Anaerobic flange sealant 574
Product Description
574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections
Technical Data Sheet:
PRODUCT | MAX GAP FILLING (mm) | VISCOSITY 25°C (mPa s) | COLOR | FULL CURE TIME(h) | SHEAR STRENGTH (psi) | TEMPERATURE RANGE °C | DESCRIPTION |
574 | 0.25 | 70000/120000 | ORANGE | 24 | 1232 | -54 +150 | machined and rigid metal flanges |
How to use
1. For best performance bond surfaces should be clean and free from grease and other contaminants.
2. The product is designed for close fitting flanged parts with gaps up to 0.25 mm (0.01 in).
3. Apply manually as a continuous bead, a rolled film or by screen printing to one surface of the flanges. For gaps greater than 0.125mm (0.005 in) using a pen roller, a rolled film should be applied to both flange surfaces.
4. Low pressures (<0.05 MPa, <7 psi) may be used when testing to confirm a complete seal immediately after assembly and before curing.
5. Flanges should be tightened as soon as possible after assembly to avoid shimming.
Package:
50ml, 20kg